Search results

  1. jeffrider

    2002 RXDI fuel sending units

    Any suggestions to what position the RAV valve adjustment knobs should be for best top end? I have read to unscrew them 3 turns out starting from all the way in making them flush with cap. I have mine one more turn outward (4 turns from 0) and the knobs sit up maybe 1/8" above cap.
  2. jeffrider

    2002 RXDI fuel sending units

    Happy to report the new OEM rectifier did the trick. Running 6720 RPMs with no miss. Yee-Haw! Thanks to all that helped me get it going again!
  3. jeffrider

    FOR SALE GP1200 Yamaha Wave Runner Excellent Condition -One owner.

    If you're in the market for a Yamaha Wave runner…, here's you deal! Garage kept all it's life and incredibly well maintained. It's in awesome shape for a 98! Even the vinyl seat shows no signs of wear. Stills runs like a bat-out-of-hell (about 63 mph), and with torque out the wazoo! Will jump...
  4. jeffrider

    2002 RXDI fuel sending units

    Thanks, gonna pull it, test it quickly to verify, then buy a new OEM for sure. I hope this is not a repeat of the new OEM fuel pump wearing out the rectifiers, then the battery syndrome all over again. I'd hoped the "OEMs that be" would have "rectified" that problem. (yuk yuk) ;D
  5. jeffrider

    2002 RXDI fuel sending units

    Hey is there are way to diagnose a main. code via the VCK without BUDS? It's now jumping to limp mode after about 2 - 3 seconds of starting and revving? Maint light come with 1 sec beeps... limps to mid speed around 4000 rpms... Maybe a clue to my top end miss? Also I haven't replace my...
  6. jeffrider

    Looking for good reasonable mechanic in Nashville

    FYI: Kyle has relocated to Knoxville and is no longer doing repairs...
  7. jeffrider

    Jet ski repair Nashville, TN

    I'm in the same boat ;DD. America's motor sports in Madison no longer works on 2-cycle engines like a DI, and my experience is they are expensive, too busy, and are not able to spend time really digging into your PWC issues. The best guy they had John, left a few years ago. .... If there is...
  8. jeffrider

    2002 RXDI fuel sending units

    High speed mis: Had an experienced tech tell me there were lots of issues with the ground to injector connections. Going to try some Detoxit on the injector connectors as well as the MPEM connections... I'll keep ya posted ;D. Thanks for all the help dudes!
  9. jeffrider

    '98 Yamaha Waver Runner GP1200

    Oops! $2250.
  10. jeffrider

    '98 Yamaha Waver Runner GP1200

    If you're in the market for a Yamaha Wave runner…, here's you deal! Garage kept all it's life and incredibly well maintained. It's in awesome shape for a 98! Even the vinyl seat shows no signs of wear. Stills runs like a bat-out-of-hell (about 63 mph), and with torque out the wazoo! Will jump...
  11. jeffrider

    2002 RXDI fuel sending units

    Yes, they pretty much have always looked OK. Change them out at the beginning of every season ever since I have owned it. What do you think I should look into from here, injectors? Last year when I had the aftermarket fuel pump rig with the rubber pipe and copper sleeve and clamps, something...
  12. jeffrider

    2002 RXDI fuel sending units

    Not seeing any water spots or rust. Course I did ride for 4 days after the initial low rpm problem that cleared up to be a high speed mis at 6600 rpms. I notice cylinder 1 has a darker plug than cylinder 2... see photos.
  13. jeffrider

    2002 RXDI fuel sending units

    Will do. Like I said, I have towed it for years at low speeds behind a houseboat with no issues.., BUT this would make sense. Thanks guys!!
  14. jeffrider

    2002 RXDI fuel sending units

    Finally had time to test the 02' RXDI again after replacing the bellows on the water valve. Right after the repair I started it up dry, it reved up nicely. A clean sounding rev. Then I put it in the water and towed it behind a houseboat about 7 mph for an hour. Upon restarting I got the...
  15. jeffrider

    2002 RXDI fuel sending units

    Finally received my bellows and spring! The $14 spring appears to now be stainless steel now. For $14 should be gold ;DDD. I have my valve back together & ready to install. I think... Q: Should the valve cover have a little tight play once spring is snapped back on? It's on good and...
  16. jeffrider

    2002 RXDI fuel sending units

    I believe you may 2 for 2! Looks like the diaphragm IS shot. Even had a hole with a tiny splinter of wood sticking thru it, see hole in the photo. ;D. Bellows clamp was completely rusted away. Ordering a new clamp and bellows. When I went to remove the valve, its was not tight at all...
  17. jeffrider

    2002 RXDI fuel sending units

    Nope. But I will for sure. Just to be sure..., Is that the part on the muffler that looks kinda like a RAV valve?
  18. jeffrider

    2002 RXDI fuel sending units

    Well I installed the OEM sending unit including the new fuel filter that comes with the unit. ($776. online). I did see an uptick in top end performance. From 6440 to 6580. It defiantly has a top end slow miss for sure, feels like it's struggling to rev more..., but can't, (if that makes any...
  19. jeffrider

    2002 RXDI fuel sending units

    Thanks for the input! It's hard not to get suckered into buying these aftermarket pumps with all the cheers of success and claims of adequate pressures online. I'm probably going to buy a SeaDoo sending unit so I'll follow up with results once installed and tested. Good news is... I had...
  20. jeffrider

    2002 RXDI fuel sending units

    Hey guys, I have a 2002 RXDI with 277 hours. Like most I have been battling whats the best fix when the fuel pump goes out. My original pump finally failed and couple years back. At the time, RPMs were fine, then they slowly deteriated, until it failed completely. I also had rectifier...
Top