Shop Discount Sea-Doo Parts

Search results

  1. DSchmidt54

    97 GSX full overhaul - at a loss

    Thanks doc.... You have confirmed my worst suspicions, tomorrow the carbs come back off....
  2. DSchmidt54

    97 GSX full overhaul - at a loss

    Ok guys , i thought i knew my stuff when it came to 787 carb'd skis, but i guess not, recently ( and by recently i mean over the last month) i have rebuilt my buddy's 97 GSX 787. Im talkin the ski had a waterlocked trashed block, water filled rear ebox, and cracked hull. We got a new shell ...
  3. DSchmidt54

    787 and 97 GSX Parts!

    Also have Fuel sending unit .........pretty sure it needs a new floaty.... and two oil tanks and an oil pump assembly.
  4. DSchmidt54

    787 and 97 GSX Parts!

    Alright, so today my buddy and I picked up a used GSX hull from Florida....and it is spotless...... the PO parts out seadoos and does a terrible job at it... so we will have a few extra parts when we are done transplanting the stuff from his broken hull to the new one.... so I figured i would...
  5. DSchmidt54

    Seadoo GT No Spark, Good Fuses, What next?

    thanks doc! just out of curiosity,have you ridden one? or any 587? Im interested to see how this runs in comparison to my buddies kawi Sea Cow...... I know its no 787... but does it even do 40? lol
  6. DSchmidt54

    Seadoo GT No Spark, Good Fuses, What next?

    Thanks doc..... Sooo is there any way to test the Rev limiter if it's good or bad? It's like a 70 dollar part lol
  7. DSchmidt54

    Seadoo GT No Spark, Good Fuses, What next?

    Hey guys, my buddy has a 91 GT with a clean engine......it has sat for a while but the ski looks good and has good compression.... it turns over , but there is no spark coming from either plug ..... we checked fuses.... they are good....any ideas? I don't know if this thing even has a rectifier...
  8. DSchmidt54

    RESTO My semi resto 96 XP project

    video set to private
  9. DSchmidt54

    97 GSX to 96XP - Can it be done??

    Thanks Guys.... guess im gonna pass on this one.
  10. DSchmidt54

    97 GSX to 96XP - Can it be done??

    Alright.... so if the XP doesnt have the MPEM but has gauges..... what then? can i splice connect the gauges in the xp to the connections coming from the GSX mpem?
  11. DSchmidt54

    97 GSX to 96XP - Can it be done??

    yeah, i know they are both 787s ... .mostly just the wiring , jet pump, and gauges concern me.... also... if the xp doesnt have a gas tank, can the gsx tank fit? i thought the xp's had smalller tanks.
  12. DSchmidt54

    97 GSX to 96XP - Can it be done??

    Thats what i was thinking..... im fairly good with wiring.... and i have all the manuals...... we want something that we can do in less than a week ( i did the motor in 3 days lol ) and fiberglass is not our forte.....
  13. DSchmidt54

    97 GSX to 96XP - Can it be done??

    Ok, so my buddy has a 97 GSX 787 carbureted, and i literally just rebuilt the entire driveline on the ski with a whole new Short block and new seals , lines, etc. And we get it out for the first time and the damn thing has a very badly patched crack on the left front side of the hull, and it...
  14. DSchmidt54

    Stainless Wear Ring?

    Re-sealing ***
  15. DSchmidt54

    Stainless Wear Ring?

    Thanks for the input guys! I ended up having a bad seal between the hull and the pump mounting bracket (i/o plate) and the ride plate....... Ended up pulling it off and revealing it all..... Currently I'm about halfway through..... Taking pictures along the way..... Will probably make a how to...
  16. DSchmidt54

    Stainless Wear Ring?

    Hey Guys, just talked to my local mechanic about getting a new wear ring.... mine is good (.035) clearance.... but it has some small grooves that make me uneasy.... well he told me he can order me a stainless wear ring for 70 bucks that will work on my 1996 GTX..... So my question... Are...
  17. DSchmidt54

    Everything is (almost) working as it should. Now I am gun shy...Right or Wrong?

    Beautiful ! That glossy chocolate is exactly what you are looking for! as for doing the chops in the future.... if the water isnt too choppy... cut the engine... stand backwards on the ski with heels in the angled part at the front of the footwells.... pop the seat, balance it on the grab bar...
  18. DSchmidt54

    WTB 96 GTX Speed Sensor CHEAP!

    Looking for a speed sensor for a 96 seadoo GTX .... preferrably cheap.... or willing to trade a R&D aquavein grate for it.
  19. DSchmidt54

    Ski/Board Racks

    Yeah, i really want a rack like that for my 96 gtx!
Top