Shop Discount Sea-Doo Parts

Search results

  1. L

    What is this? I need to buy a new one.

    Here is image. For some reason it didn’t upload with my initial post. It’s the party in between the spark plug holes.
  2. L

    What is this? I need to buy a new one.

    The metal part that connected to the plug broke off today. I need to know what this is so I can buy I new one. See image.
  3. L

    1996 Yamaha Wave Blaster

    Looking to buy a ‘96 Wave Blaster.
  4. L

    1994 Sea-Doo XP Piston

    Paid Full Bore the $285 for the boring end kit. I have emailed the company twice and have not gotten an email back yet. Is this place a scam? Did I just throw away $285?
  5. L

    1994 Sea-Doo XP Piston

    Do I need to get a top end kit or just new pistons?
  6. L

    1994 Sea-Doo XP Piston

    Found the WSM website, nevermind.
  7. L

    1994 Sea-Doo XP Piston

    What would be a good website to get WSM pistons?
  8. L

    1994 Sea-Doo XP Piston

    So, if you’ve been following my issues, I had rebuilt the carburetors and finally got the ski running. Dumped it in the water and it wouldn’t go above 2,500 RPM’s. So, this evening I was digging around to find the issue. Dug into the engine, for some reason, but I’m glad I did. I am going to...
  9. L

    94 XP won’t go above 2,500 RPM’s when given gas

    I gave it choke when running and it shut off.
  10. L

    94 XP won’t go above 2,500 RPM’s when given gas

    Just got back up to the house. May or may not have been smart, but I held the throttle down for a while and it finally took off, but that only lasted about 7 seconds.
  11. L

    94 XP won’t go above 2,500 RPM’s when given gas

    I will go try it and see if it changes anything when running.
  12. L

    94 XP won’t go above 2,500 RPM’s when given gas

    Not while driving, no. I gave it some choke to get it to turn over, but then released it.
  13. L

    94 XP won’t go above 2,500 RPM’s when given gas

    Genuine Mikuni Dual Carb Carburetor Rebuild Kit Sea Doo SP SPX GS HX GTS 717 720 Here is the link to what I used and where I purchased them.
  14. L

    94 XP won’t go above 2,500 RPM’s when given gas

    Yes. Both the choke and throttle are working properly. I made sure before I put it in the water.
  15. L

    94 XP won’t go above 2,500 RPM’s when given gas

    I used a Mikuni kit. High and low speed springs were in good shape, so I did not replace them. Yes, replaced both the fuel filter and selector, as well as the lines.
  16. L

    94 XP won’t go above 2,500 RPM’s when given gas

    So, I just recently rebuilt the carburetors in my 1994 Seadoo XP. Ran great out of water and would go to max RPM’s when given full throttle. When in the water, it’s a different story. Just launched her in the lake and it started just fine. The problem I faced was when I went to give it gas, it...
  17. L

    1994 Sea-Doo XP bad idle

    So, I recently rebuilt the carburetors and replaced the fuel lines in a 1994 Sea-Doo XP that wouldn’t start or rev up. It started after a couple of goes with premix, but wouldn’t idle. It would idle for 5 seconds then die. It would do fine when given gas. Anyone know any solutions?
  18. L

    1994 Sea-Doo XP carburetors

    I looked Into your thread and some pictures I found on the internet. I got the choke and throttle back together and it’s running somewhat decent. I had to take the choke apart because I needed a new cable. The other one was split. I don’t know how, but it was.
  19. L

    1994 Sea-Doo XP carburetors

    So, I picked up a non running 1994 Sea-Doo XP. I rebuilt the carburetors and replaced the fuel lines and fuel selector valve. The only problem I am having is, I wasn’t thinking and didn’t take any pictures of what the carburetors looked like put back together. I was hoping someone with a similar...
Top