Shop Discount Sea-Doo Parts

Search results

  1. Rdessewffy

    Merry Christmas Giveaway Thread!

    I would like a shirt but can't figure out how to pm... cool....
  2. Rdessewffy

    97 xp throttle cable plastic thingamajig at handle bar ( small piece)

    Any one know how this piece goes in? I tried all kinds of ways and doesn't seem to do anything. The parts and shop manual show it in horizontal and vertical positions respectively. It doesn't click or snap in and is really loose fit every way I try. Thank you!
  3. Rdessewffy

    97 xp motor mount bolt broke in piece glassed into hull

    Thanks, I tried that but drilling stainless isnt easy. I was able to get a pilot hole started a bit but it went off center to the point where my bit for the helicoil would be too far off if I could even get pilot all the way through. I can see its 1/2 inch thick plate by measuring in other hole...
  4. Rdessewffy

    97 xp motor mount bolt broke in piece glassed into hull

    Does anyone know what that piece looks like and dimensions? I read a great thread on here by mikidymac where he did some glass work to fix but I was hoping to avoid cutting the piece out and fixing it. I want to machine a solid aluminum spacer and bolt that through the fiberglass and into the...
  5. Rdessewffy

    97 xp oil fill plug at crankcase

    I ruined it trying to get it out. I looked all over and can't find a replacement. Does anyone know where to get it or if there is a compatible one with same diameter and thread pitch? In manual it shows there is also an o ring for this but mine didn't have one..... did previous owner remove or...
  6. Rdessewffy

    Hole in exhaust pipe

    Oh, I'm keepin it.... it's my baby :) The bumblebee bee lol....
  7. Rdessewffy

    Hole in exhaust pipe

    I'm going to aluminum welder Thursday. I have 1/4 inch aluminum I'll cut to bring him. The other 3 look perfect.... thanks for the help!
  8. Rdessewffy

    Merry Christmas Giveaway Thread!

    Hahaha!!! That's it!!!!
  9. Rdessewffy

    Hole in exhaust pipe

    I grinded all the paint off and when I got to this spot it looked like body filler was in there. I took it all out and this is what I'm left with. Anyone come across this issue? Can I actually use Duraglass filler to fix it? Hope I dont need a new pipe.... thanks all....
  10. Rdessewffy

    Merry Christmas Giveaway Thread!

    First time riding a ski, was on vacation in Florida ( moved here 30 years ago) . My girlfriends uncle took me and told me tell them I rode before so I wouldn't get the big float attachment ( it was the 1st jet ski stand up type) . It was a blast but every time I wanted to turn around, i had to...
  11. Rdessewffy

    97 xp PTO flywheel removal

    I got a little bit of water in here, is that a problem? It wasn't much, a little spray..... could it possibly get past anything and end up in bottom end anywhere? I cleaned it out best I could and sprayed fogging oil in there. Its behingvwhere the PTO flywheel goes.
  12. Rdessewffy

    97 xp PTO flywheel removal

    Hahaha! Its filthy and I started taking all the paint off with a wire wheel and spray stripper. Wont look like that in a couple weeks, but yeah, it looks like it was on fire....
  13. Rdessewffy

    97 xp PTO flywheel removal

    It worked! Got it off! Had to wedge engine under trailer hitch of my truck and didn't need heat even though it freezing cold here at under 70 degrees lol. Awesome...... by myself..... rope in cylinder is genius, they should put that in the manual ..... thanks
  14. Rdessewffy

    97 xp PTO flywheel removal

    Thanks everyone, I'll give it a try tomorrow. I can't believe rope in piston does the trick lol, that's crazy.... I have two 97 xps and i know parts are hard to find because they are very different... looked all over for replacement pto flywheel Nd found 2 on Ebay for 100, and one on craigslist...
  15. Rdessewffy

    97 xp PTO flywheel removal

    Motor is out of hull. Can't lock other end to be able to twist it off. I read a thread on here from 2011 that said fill PTO cylinder with rope.....really? That scares me... is this really a thing? I first read it and thought I should shove rope in the gear, so I dod that but just shreds the rope lol
  16. Rdessewffy

    Brass fitting on carb removal

    I did. Nothing comes out when I spray wd40 or carb cleaner. I do see the tiny pinhole it's supposed to come out of.... old grey lines clogged everything, just these last two I can't get... I already broke one, so I'm bringing to small engine shop tomorrow to have them fix it all. Thank you!!
  17. Rdessewffy

    Brass fitting on carb removal

    Both carbs same fitting clogged( ones with zip ties on them). I've been sticking pins, paperclips, compressed air, carb cleaner and gas in them and can't unclogg. My last option is to remove them but not sure how. I tried to twist a bit but didnt want to bend them. Should I use heat? Any idea...
  18. Rdessewffy

    97 xp vs. 95 xp starter rebuild

    All the rebuild kits I'm seeing say they work for both models. They say they are sold for brushes but some of other parts might work and I get that. I cross reference the brushes and holder and they are two different part numbers. Some of other parts match up but I'm most concerned about the...
Top