Recent content by vogs77

I haven't had a chance to get it out on the water but look forward to it. I have had many other skis but never one with this hull, my xp was great but a bit too small, I love my GTX for cruising but not as fun to spin around. I think this machine is going to be a blast to ride! I think it...

Midiymac you were correct, I was just overthinking it. Second regulator fixed it all up and is now running correctly with the proper voltage.

My new project 1996 GSX I purchased partially apart due to not running right and I have it all back together and found the source of the issue to be it is overcharging at 16+ volts. I installed a used voltage regulator and it is still overcharging and I am waiting for another one to arrive for...

I used it often also to help others with their skis as well as my own, I will miss the free and easy access to all the manuals.

Post can be deleted I just bought a used one from Westside Powersports.

I need new voltage regulator for a 1996 GSX I am putting back together, finally got it running but will not rev up at all. Found almost 16v at the battery, unplugged the red wire from the regulator and she runs great! Who sells a good one that will last, brand?

I am trying to access the manuals for my skis as I have many times before but now on both of my computers it tells me "it appears you don't have permission to access this page". Is this page no longer active?

Are the side rub rail insets on the 90's skis the same size and shape? I am looking for one piece of the rub rail insert for my 96 GSX and lots are listed in purple on ebay but none are the specific part number. I am thinking they are interchangeable but I don't have multiple skis here to...

I am working on a 1996 GSX that I purchased in pieces. The jet pump was installed with sealer to the hull. The part lookup doesn't show a hull to pump seal. Does it take rubber or neoprene seal, what part number should I look for if it does? Thx for any help.

Rebuild, PWC Muscle did mine. Fast turn around and fair price too with them.

I pulled my injectors/the repair manual, unplugged them, then sprayed fogging oil into the holes while cranking the engine. After that I pulled the plugs and sprayed into the cyl's also.

I use 30w in my 951.

Starter relay, just replaced mine for the same exact thing 06 GTX

I have purchased a Poppy cover and Seadoo cover for my 2006 GTX. Neither of them fit, too tight in the handle bar area and do not reach down the sides in the front. Has anyone ever ran into this issue. Is there something strange about this year it looks the same as all other 2002 - 2006 GTX...

0 ohms is perfect connection, no resistance. Open, n/a, or very high resistance could mean open depending what meter you are using.