ski-d00's latest activity

That oil filter has more than typical but if the oil hasn't been changed in a long time that is what it will look like. You should...

probably, but none that I deal with

Only half of the display works because it has to be flashed and married with BUDS for it to work properly. All the China ones are made...

So you don't even need to pull the engine and take anything apart, just flip'er over? Sounds like pretty bad advice.

Metal shavings in the oil filter is normal. Every time its started the bendix gets slammed into the flywheel which causes metal...

Are they scratches or residue from the protective plastic that the dealer didn't clean very well? If they are scratches, I'd take it...

Wow, that's a pretty high price for a 2009 GTI. You should be able to get a 2012+ with ibr for that money. What part of the country...

Torx racing can supply what you need. You can send your ECU to them and they can sort of test it by checking the file and see if it can...

Yes, it could definitely be a bad post. Does it help if you put key on hard and fast after the ECU is woke up? The single beep is...

Fuel pump will never run until you get 2 beeps. It may not be recognizing your keys as being programmed to the ECU. It completes the...

It is only dealer software unless he has pirated software. I still think it's not married properly. Should be flashed for proper...

Disconnect your battery, check your cps resistance at the ECU, not just the connector. Should be 940ish ohms. Reconnect battery and...

You need to ride whatever ski you buy and make sure it reaches 68mph and 8000+ rpms. If you buy and ride the 2008 this season without...

Can't tell much from your pic since I can't see the encoder gap and don't know the crank orientation. It looks like you have it right...

Or find someone with BUDS. I typically replace about a half dozen clusters a year.