My Challenger 180 has started to feel like its leaning to the right hand side. Ive checked for water inside hull, nothing! Only my wife and I with our grand daughter in the back center. This has just started the last time out. Anything come to mind that could cause this?? Thanks for being here!
Took to shop today and was told that the ECM might be bad. At 7 hrs, stunning pos. Not the keys!!! Is it possible to purchase and replace the ECM without seadoo shop???
Well today I thought Id take the newer jet ski out. Launched and installed the key and all I got was "Reading Key" would not start. Tried the learning key and got the same thing. This jet ski has 7hrs on it, anyone have any idea what's going on?? I have the candoo pro, can I reset the key...
Im gettting ready to send my supercharger off to be rebuilt. PWC Muscle. Any reviews on this place? Should I purchase the Warranty? Just curious from everyone. Thanks for all your help
OK is anyone rebuilding there own super chargers or is it better just to send them off for rebuilding. I’m looking at this like packing your own parachute:) I want to know that everything is done right.
OK I guess I was trying to be to gentle:) Its finally off I had to remove the strap from the muffler, undo the 4 hose clamps on the exhaust pipe to muffler, disconnect the rubber hose from the muffler, disconnected the two top hoses on the exhaust pipe, and loosened the clamp on the exhaust...
07 Challenger 180. I just removed the bolts on my supercharger and started to slide out the unit. The side of the unit is hitting on the black muffler, Im working from the service manual and it says nothing about moving the muffler forward to allow the removal of the supercharger. Any tricks...
I was going by the service manual. Thanks for the help. It talks about turning the engine over without starting and I decided not to do that:). Just curious how high should the water hose be turned on when starting outside the water, I just get it to where it runs out the back. Thanks again
I just finished changing the oil on my 2007 Challenger. Before changing the manual says to bring the oil to operating temp and run at 4000 rpm for several minutes. I attempted this and at about 2500 rpm there was a strange rattling noise I think coming from the impeller, so I shut it down...