mkov608's latest activity

U16a1 and 2 are CAN (network) faults with the cluster. The first step would be to check the wiring between the cluster and the ECM...

P0298 ... engine oil overtemp right? 1st step in the manual. "Check for debris/blockage in the lubrication system." Do you know if...

Yea ... We got a brand new GTR 230 in Sep of last year. We put 4 hours on it before the off season. I just started it yesterday, and...

Question 2: No.

Skiasylum is right. Oil color is no indication of oil health. For proper analysis of your oil (taking out the guess work and...

Darkness of the oil is not a great indicator of its condition.

I've installed the kit on my 2023 GTR 230; The two batteries wired in parallel (no switch). On the '23 model, the 2d battery goes in...

I feel your pain! My 2017 GTR (58 hours) melted a piston on cylinder 1 last fall. I rebuilt the engine, new block $1,700.00 big ones...

I use a Can Doo Pro, but I can't change fuel maps with it ... as far as I know.

Disconnect the battery.

Ok. I need you to perform the following voltage checks. Disconnect electrical connector from fuel pump. 1. Positive lead to battery...

Are you at 10 volts when the fuel pump is running?

Right, the ECU provides the ground for the fuel pump. That's why the pump shuts off after 10 seconds or so; it only runs long enough to...

I had a pair of '02s back in the day. I had a no-start condition that was caused by a faulty socket on the MPEM. I would shake move...

Measuring the resistance of a CPS is not the way to go. You need a lab scope to see the signal. Here's an example of a faulty CPS...