Recent content by Minnetonka4me

  1. Minnetonka4me

    RESTO 03 GTX DI Multifunction Display Removal

    They slide first, then comes out.
  2. Minnetonka4me

    Rotax 787 - How running it outside the hull?

    If you want to ship the mpem to me I can program a key but I'm in the US.
  3. Minnetonka4me

    97 GSX Weird problem...?

    Most likely dead... You can send it to me to double check it. If it was just a key the lcd would come on when you hit the start button a few times. Text me at 6127439311 for shipping address.
  4. Minnetonka4me

    MPEM Schematic

    Welcome to the seadoo world. Where lots of things are proprietary. The wire diagrams tell you what pin does what, but there's never been a schematic of the inside of the mpems that I've ever seen. And I've been around them over 20 years.
  5. Minnetonka4me

    MPEM Schematic

    The actual board... There's nothing for any mpem. The wiring diagram can be found at seadoomanuals.net
  6. Minnetonka4me

    Troubleshooting 97 XP

    If it's not the starter (or power/ground wires) and you are certain the pump bearings and midshaft. Bearings are good, then it maybe the crank.
  7. Minnetonka4me

    Can you check compression without a key?

    Yes jump the solenoid with a pliers. You won't have spark but you can check compression.
  8. Minnetonka4me

    Carb identification

    I'd assume they don't have a venturi/bomb sight in the throat? They are red top annular carbs. Manifold is for a 720.
  9. Minnetonka4me

    Water in Tuned Pipe

    You'll want to repair that pipe. Just about everything is cracked out there and if it isn't... It's expensive. External crack isn't as big of a deal as an internal crack
  10. Minnetonka4me

    Seadoo beeper continously beeps

    If the info gauge made it stop... It's the info gauge. Not common whatsoever but another guy just posted another crazy issue. Maybe this is the year they all fail. They have been pretty stout up to now. I sell a few a year but nothing crazy.
  11. Minnetonka4me

    Failed Multi Gauges

    Like I said it's not a very typical issue. I sell them for about $100 if you wanna replace them.
  12. Minnetonka4me

    Failed Multi Gauges

    The oil is the blue wires, if you touch them together the light should turn off. The voltage light is the red with blue tracer.
  13. Minnetonka4me

    Failed Multi Gauges

    No one fixes them. Quite odd they had those failures, typically they just don't work at all when they die, I've seen a few with burnt lcd panels.
  14. Minnetonka4me

    The X4 Thread

    Little billet x-4 porn!
  15. Minnetonka4me

    1996 XP Surging at Maxx Throttle Top Speed

    You always replace them. Every time. Anything else is being lazy and cheap. Buy a 50' roll of tygon in ebay and it comes out to about $1 a foot.
Back
Top