Recent content by flyer5

  1. flyer5

    Susquehanna River Rides and river levels

    I want to put together a list of areas along the Susquehanna that can be explored and what levels allow the best travel. Bloomsburg PA River Level 3.6' Travel between Bloomsburg Launch to Berwick Bridge. Worst part was below the Rt 80 bridge passage along the left side heading upstream...
  2. flyer5

    4-tec Preventative valve replacment

    So for an update. I finally was able to get a little over 1.5hrs on the ski after all the work done. Ran great but was limited to 7600RPM I assume it needs the knock sensor harness update. I have one ordered so I will update once the weather cooperates. It was a water temp of 48* last time out...
  3. flyer5

    New here from Pennsylvania

    Over in the N.E. Part of PA here. I just finished up updating my new to me RXP and will be going crazy waiting as well.
  4. flyer5

    4-tec Preventative valve replacment

    I may try it. I saw no signs of corrosion on any of the ones I removed.
  5. flyer5

    4-tec Preventative valve replacment

    Well here is my update. I rebuilt the SC with the Seadoo rebuild kit. I lapped and installed then new valves Intake and Exhaust. New Seadoo head gasket and head bolts. While the head was off I removed the oil jet from the block and replaced the rocker shaft with a new 06 and later type. But...
  6. flyer5

    4-tec Preventative valve replacment

    I did leave the intake manifold in place and removed the exhaust manifold with the head. The biggest PITA was the front hose going to the exhaust manifold on the bottom mostly because of the clamp. The other one that caught me was the other hose going from the manifold to the pipe, I didn't...
  7. flyer5

    4-tec Preventative valve replacment

    Thanks, that's what I was looking for.
  8. flyer5

    4-tec Preventative valve replacment

    I just purchased a 04 RXP. I plan on replacing the valves before they break so I ordered Torx valves both intake and exhaust. I would like to document it as well on video. If it comes out well I will share my experience. I am hoping to get as much advice as I can before starting to help things...
  9. flyer5

    What are our names in real life?

    Just purchased a 04 RXP. So I have a feeling I will have a lot of questions. Dave
  10. flyer5

    Seadoo Engine Shop

    I give a thumbs up for turn around time about 3 weeks as promised. Looks nice but I have not put it in yet. So far my only complaint is they painted over the engine ID tag. But now knowing that next time I will remove that as well. If that's the worst thing I can find I will be very happy as a...
  11. flyer5

    has anyone used ses for engines?

    So far my feed back about SES Positive as well. Delivered as promised. About 3 weeks . I will update once I get it running may take a few weeks because of time but I will try to get it running this season for sure. Thanks SES. Dave
  12. flyer5

    has anyone used ses for engines?

    I called SES yesterday they said it should ship on Thursday. So it should be within the promised time frame. I guess we will see. So far so good. I will update as I know more.
  13. flyer5

    this is too funny so i had to post it. this is a craigslist ad i came across

    Thank you, I haven't laughed that hard in a while. Now I know how I can still use my Xp while I wait for the engine to git done.
Back
Top