Thanks! Not sure on the GPS and speedo. Plugs are brand new when I changed the oil when I winterized it. Oil level reads 3/4 on dipstick. First thing I checked before firing it up to go in the water. 181 hrs. Supercharger was rebuilt at 154 hrs with 200 hr BRP kit from dealer I bought boat from.
Well.... Got the drive line all freshly painted up and Solas SRZ 13/18 impeller installed. Boat went in the water for the summer last Friday. Runs great. No cavitation at all from take off. No real difference between the Solas and stock impeller. Only thing is all I can get is 7260 RPM and 33...
Nate is right. I just went through the same thing. Take your pump apart before you order. I have a SRX-CD-14/19 that is perfect I'd sell if it's what you need. I'm in eastern Ontario. I have a 2011 Challenger 180 SE 215 HP.
I didn't have any cavitation. Put your foot in the oil pan and it took off! Only thing I didn't like is the way the boat would slow down when turning left mostly. The wear ring is like new as is the stock impeller. So really, I didn't Need to take it apart. Stock impeller and wear ring are just...
Well......Nate was right! SRZ was the right one.
I read that you could send your SRX and have it machined to SRZ. Recess is 4.5 mm deep by 28 mm wide. It also has an O ring in the recess. Don't see why the shaft couldn't be machined to accept the SRX. Would be easier or buy one.
Anyways, I...
Ya, it helped a lot Nate. Glad I didn't have it all torn apart and found out. How did you determine you needed a 14/19? Riva said right off the bat "first off, that impeller is wrong for your boat. You need the 13/18"
Thanks Nate. I did see your thread but it didn't click with me for some reason. Bummer! Looks like I have the wrong impeller. Talked to Riva, great tech guy too, and he too confirmed I have the wrong impeller. Need the SRZ and not SRX. He said I could sink my boat if I use the SRX. Would push...
Well I got a Solas concord 14/19R impeller locally for a good price used. It's used but perfect. Not a nick in it. It came with a thread on seal cone thing. It's missing the outer o ring but the inner one is in it. Anyone know the proper size of the o rings? Thinking I should replace them when...