Recent content by Brprxt215

  1. Brprxt215

    XP 787 limited build. Gets way too hot

    Hi guys I built a limited race boat. Made it through the first round of racing got home and blew it up. Put a fresh rebuilt engine in and supposed to race this Friday. Tried it yesterday and the pipe stays cool but the ADA head gets super hot. The plugs were almost to hot to unscrew by hand. I’m...
  2. Brprxt215

    787 msd ignition not powering on

    I built a limited class boat over the winter and went to fire it up today. I put the key on and only get one beep. I opened up the grey box and the msd is not lighting up. Any tips or advice? Thank you.
  3. Brprxt215

    Cylinder crack during rebuild.

    I bought a set of used oem cylinders with new sleeves off eBay. Got it all assembled squish was off so disassembled to put different base gasket in. Upon removing cylinder found this crack. How could that happen? Is that maybe why the case was painted over? Cover it up?
  4. Brprxt215

    FOR SALE New Billet X4 Extended Trim Tabs

    I would buy a third set
  5. Brprxt215

    FOR SALE 96 XP Full Part Out

    Do you have ecwi controller?
  6. Brprxt215

    FOR SALE Looking to buy ECWI controller for Factory Pipe (787)

    I need an ECWI controller for a spec 2 anyone have anything? PayPal ready. Thank you
  7. Brprxt215

    Jet settings for 787 mod

    Very nice I will take note of that. It doesn’t seem like many people are running the red top carbs so I may try and get rid of them for some novi 44s
  8. Brprxt215

    Jet settings for 787 mod

    Hi guys very green but in the process of learning how to build my first limited race boat(96XP). I am trying to figure out what jets to use when I rebuild my 46mm red top(mikuni) carbs. Here is a list of parts that will be used with the carbs if this helps: odyssey head with 43mm domes, spec 2...
  9. Brprxt215

    Rave bellows collapse

    It is not. Originally I was getting terrible blow by but not sucking in diaphragms. I put in new housings, bellows, plastic caps, gaskets, and orings now it sucks the diaphragms in every ride but no blow by. I can’t win lol:/
  10. Brprxt215

    Rave bellows collapse

    My rave bellows collapse every ride. Any ideas why. Here’s a picture. Thank you
  11. Brprxt215

    Rave bellows collapses

    I was having a problem with my raves leaking very badly. I bought new housings, bellows, gaskets, orings and springs. Now they just collapse on themselves after a ride. Any ideas?
  12. Brprxt215

    Rave valve leak

    I have not. I just bought the housings, diaphragms and new gasket and o rings. Going to start with everything new except blades because I’m not comfortable shaving them down to match the pistons
  13. Brprxt215

    Rave valve leak

    96 xp and the raves constantly leak. I’ve replaced the gaskets and orings every year when I clean them. They never stop leaking
  14. Brprxt215

    Novi 44s for 96XP

    Cool thanks Matt! So currently it has K&N flame aresstors which will be gone when I get carbs. Sponsons and a jet dynamics intake. I just bought an R&D intake manifold. I plan on just getting everything now and go to town when the season is done!
  15. Brprxt215

    Novi 44s for 96XP

    Thank you. I’m going to get a spec 2, msd enhancer, the novis, R&D 88/85 nozzles and a prop
Back
Top