Search results

Would like to address oil changes on my own however i cannot find a single link that explains how-to or where i can purchase a sevice manual for a 2006 sportster 4-tec 215 supercharged boat....? Is this such a far fetched idea to actually change your own oil ?... The last thing i want to do is...

Hey guys...I too am having this difficulty with my '06 sportster...I also hooked up an air pump and after about 5 seconds it popped the fuse.....I replaced the fuse and it popped it again....I put in a stronger fuse and its not popping but now I'm not comfortable running anything out of it for...

Attempted to use the 12v outlet to work an airpump. Found the fuse was blown. The fuse list calls for a 5. The fuse that was in place and blown was a 15. Replaced with a 5 and it immediately blew. Replaced with a 20 for curiosity sake and functioned fine. Don't have an owners or service manual...

Howdy all!...hope your boating season has seen its first day as ares...found that the engine is surging on idle and about half throttle...smoothed out after a lil run...used bout 3/4 tank of fuel...figured it was stabilizer workin its way out...second time in the drink same thing....?....can i...

thanks for reply 'voodoo'...trailer lighting up and running w/LED's all round...lookn sharp ....breaths new life into the trailer as sportster in 'like-new-condition'.....recommend uprgrading to anyone

LED being the key item when coming to discover (i 'd say the hard way) troubleshoot issue w/ the inoperative lghts on the driver side. i was on the rgt track when i discovered that the trailer, when utilizing incandescent fixtures, needs only be grounded as a whole. however when dealing w/ LED...

curious if you posted this as a seadoo wiring diagram or generic?....not accurate....can u chk my post and let my know if u have any suggestions?...thanks

joys of wiring...driving me bonkers...changed harness...have good power coming out of it for boths sides of harness...pasngr side all functioning in the back...driver side in the back, nothing...tested lght...works...went so far as to scrape paint off trailer for good grnd, nothing...wiring frm...

Howdy all....eager to begin another season of boating but trying to address some issues that I encountered at the end of last to get my trailer back in compliance. Noticed that the rear lights were no longer functioning (most likely due to them not being water tight...found out the hard...

recall on washers Been squeezing in as many trips to the lake fore the season ends....aside from the two occassions that dropped the boat into the drink only to find the battery dead, one new battery later and family been having a blast!.... ....with all the issues these ceramic washers...

Hey guys...took the boat out for the first time last weekend....what a blast!...that 215 SC engine pulls....have a questions regarding the 12V socket....would it be ill advised to use a 12V air pump in that socket to inflate a rather large (3 man) inflatable?

checked out m/f...you're right...how dumb is that....so it would seem to me that i then should simply be able to tap the bolt up into the hull...of course that would make sense but after looking for the nut as you explained I've come to the conclusion that in the sportster it is directly under...

front...and apparently from what I just discovered there is no reputable dealer in my area willing to work on the Seadoo boat with the rotax engine....excellent....but from my doggn' round I discovered that this bolt is actually screwed into a fiberglass sleeve and since i already sheared the...

the single forward bolt...saw your posting concerning your dilemma with these grate bolts..."four bolts..take fishing line off bolt back on ...bingo!"...more like bongo!:ack:

by any chance is this bolt reversely threaded?...I ask only b/c on my '06 sportster, in the process of attempting to drop the grate to remove fishing line from the shaft I sheared the bolt head off after only a couple of turns...kept getting tighter than loser...was thinking that perhaps the...

TuffStuff....specifically designed for vehicle upholstery....once used it on an ol' beater I had to impress a date....sprays out as a foam...let it sit for a few minutes and wipe off..no scrubbing or rinsing req'd....left nice clean seats...didn't help with the date

thanks guys....suggestions were helpful although when I mentioned ceramic washers to the previous owner I may have well being speaking Greek...regardless made the purchase...for $10k I think I got a great deal aside from the 19 hour round trip to pick it up.....gave it a good once over and...

Lookn at purchasing an 06 seadoo sportster w/ the 215hp engine...present owner informing me that the boat has 35 hours on it....I'll be traveln a good distance to get to it and as this will be our first boat some what apprehensive concerning the whole deal. Not sure what to look for. I'm aware...

Lookn at purchasing an 06 seadoo sportster w/ the 215hp engine...present owner informing me that the boat has 35 hours on it....I'll be traveln a good distance to get to it and as this will be our first boat some what apprehensive concerning the whole deal. Not sure what to look for. I'm aware...