Search results

I just verified that my 98 GTX limited (951) LSA's are set at 1 1/4 turns. My mag side HSA at 0, and my PTO HSA at 1/4. On idle , it is very erratic and will idle at 1100 and then jump up to 2000 for a second then back down to 1100 and continue that pattern during idle and sometimes stall...

Hello all, I have a 98 GTX Limited, carbs were cleaned last summer and ran great up to a couple of weeks ago. When i start the machine after it has been sitting, it idles a little rough, but nothing major for a 14 year old machine. The problem i just started having is as soon as i touch the...

I have a shop manual for my 98 GTX limited, just wondering why my manual refers to the 947cc engine when my machine is a 957? Also as far as winterizing for my 957cc , all it specifies is to pour AF into the block via the water return hose, and wait till you see AF pour out of the "engine...

98 GTX limited ( 957 engine) I think? I searched many threads on winterizing this ski, does this make sense? 1) pinch the small clear engine drain hose. 2)Disconnect engine water return hose. 3)Temporarily install a short piece of hose to engine water outlet at cylinder head. Insert a...

98 GTX Limited. I replaced all my old grey fuel lines, cleaned out my carbs, cleaned my rave valves. The machine runs nice and clean, very smooth. The only issue i have is when i hammer it out of the hole, it boggs down for about 1 or 2 seconds then takes off like a rocket. Other than that...

Hey guys, ive had mystery problems all weekend, here is my next one. 1998 GTX limited Machine was in the water running great, after 1 minute "Hi-Temp" warning started to flash and loud constant beeping noise from the machine. i checked in the back and didn't see any water coming out of...

Hey guys, last week i cleaned my carbs and replaced all my gray fuel lines. Put everything back together and it fired up no problem. This week i cleaned the inside of my hull, made sure i covered the electrical box in the front and back as well as the carbs. Only let about 1" of water insdie...

My Speedo on my 98 GTX limited does not work. There are two speedo's ,the digital display and the old analog needle. They both sit at zero. What is the most common problem, and where should i look first? I spun the little wheel at the rear of the ski, and it spins freely.

Here's the scoop. I cleaned my Carbs and changed all my old gray fuel lines, just put everything back together. I noticed that on the carbs, there is a small wheel what the throttle cable attaches to as well as the oil injection cable (i think) attaches to the same wheel. For some...

Im looking for a cover for my 98 gtx limited. can you recommend anyone in Canada or better yet Ontario, that will make a simple colour cover for a great price? Thanks

I wanted to clean the inside of my 98 GTX limited (motor and hull). I have read than DAWN dish soap works the best. What do i have to do? in the sense of covering certain components up? Or do i simply pour in scrub and power wash? Ive never cleaned the inside, so you could imagine how dirty...

Just replaced all my old gray fuel lines, with automotive 50psi line. Getting ready to put my carbs back in. How difficult will it be to start this machine, now that all the fuel lines are empty? What is the trick to fire this engine up?

Just noticed on the top of my oil tank for my 98 gtx limited there is a "oil level sensor assembly" with some wires coming out of it on one side, and a "check valve" on the other side. (part # 275500398 ) It looks like a hose of some sort should be plugged into that check valve, mine does...

Just in the process of replacing my fuel lines. How do i go about cleaning the fuel selector, and where is its location? 98 GTX limited Thanks

Does anyone know the settings for my LSA & HSA for PTO and MAG side? Also what is the best way to clean the small carb filters and the fuel baffle filter without damaging those little screens?

Just cleaned my carbs, out side of the 1/4" and 5/16 fuel lines that come into the carb, there is a very small line that runs for one carb to the other , and uses a plastic T. I thought this was just an air vent line, but it looks like a very tiny fuel line. Does anyone know what this is...

If you are just doing a regular carb cleaning and not a rebuild, do you have to remove the needle and seat? :confused:

I still have my original gray fuel lines on my 98 GTX limited. Does anyone know off hand of what size hoses i need? I think there is two different sizes, and what length would i need for both? 30 psi or 50 psi? Thanks :cheers:

Hello, trying to clean my carbs. I have never pulled them out before. Does the black head pipe from the cooling system have to be removed to get at the carbs? Thanks

Hey guys, I have never cleaned my carbs on my 98 GTX limited before. Ive cleaned my Ski doo carbs before, so i have a general idea. i was trying to search for a how to link on here with pictures and step by step instructions but could not find much. Does anyone have a link saved with a...