Search results

>>>>>>>>. Wrap Up this post <<<<<<<< Want to send a shout to all that helped me out in this thread . Have been to the lake and son has run the hell out for two days without a single hiccup! Ski runs strong and Reva max out at 6850. All systems working good. Just need to do some cosmetic...

Unplugged battery and put fuel in. All is good. Would have been nice if my son had told me low fuel light had been on several minutes 😡😡😡 Haha

Trail run was a huge success ! No faults , no alerts . Ran strong One question . I only put 6 gal total I. Because if it didn’t work I did not want a bunch of fuel in it. After a little more than an hour low fuel light came on and ski didn’t have any power . So shut it t off and my...

😃😃😃😃😃. SUCESS 😆😆😆😆😆😆😆😆 Don’t know what I did but when out this morning and was gonna chase wiring. So tested voltage at fuel pump plug and saw it jump to 12v momentary. Tried starting and finally had fuel to fuel rail ! But still would not start . So was about to pull fuel rail and...

I’m a hard head . I just have a hard time quitting a project . I’ve pretty much determined I must have 12v at the pump . I’m only getting 5.5v. So I’m going to work my way back through the wiring . I see the fuel pump fuse is the 10amp one from the bottom. I also got the pin/plug...

Waiting to hear from eBay . I’m need to know what voltage I should have at the plug

Waiting to hear from eBay . I’m need to know what voltage I should have at the plug?

If it’s not getting correct voltage from Mpem then may not be able to draw fuel up but at this point I’m just guessing. Also put a new fuel pressure regulator on original pump

This was the pump I bought off eBay DOA The original pump I removed , cleaned , put new filters in it and reassembled. It runs now. But can’t be 100% sure it’s good either .

What now?

Non-working pump will be included. Could be rebuilt

Please refer to my thread back ( in the PWC world) for full details. I’m only asking to get out the little bit I’ve put in it $500. Located mccomb ms 39648 I put my eBay pump in it and it does not work at all. I cleaned the plug on my old fuel pump and got it to prime and run but still...

Also which one of these fuses is the fuel pump fuse? Should it be a 7.5amp fuse?

Might be on to something. I cleaned connector on top of old fuel pump. Good bit of corrosion. Now I can hook battery directly to connector and pump runs. So tomorrow will take new pump out and inspect it. But old pump may work now . Should pump be getting 12v when priming? This is...

Further update. Double checked all fuses . Hooked test light at mpem box. Came on when key inserted . Did same at fuel pump connection, it came on. Decided to test old pump. Connected a battery to terminals on top , nothing. Then I backprobed terminal under connector and pump ran...

Getting 5.5v at fuel pump plug

<>>>>>>>>. Update <<<<<<<< As expected I installed known good fuel pump and it’s a no start. When I put the “key” in the pump does not prime . What do I check next?

I was out of town this week. I’ll be putting that eBay pump in within a day or two . I’ll certainly post the results. Also bought a new starter solnoid . Old one is acting up. If it does not run after putting the pump in I am gonna let the first $400 take it. ( that’s what I have in...

>>>>>>>>> update<<<<<<<<<< QUESTION PLZ Removed fuel rail and fuel injectors I used an electronic tester/cleaner. The fuel injectors work and atomize the fuel . Fuel line from pump to rail is clean. I’ve tried to determine if the injectors are firing while I turn the engine over but can’t...

Well, took fuel pump out. Other than breaking off the vent line nipple it went fair . Of course filters looked bad. One on bottom was completely deteriorated. I put the new regulator on top and new internal filter . Hooked pump to 12v and it ran . Put it all back together and installed it...