Search results

I have 1995 seadoo xp it ran amazing till it didnt. I was in the water with my buddy he was riding the seadoo because it was the better running of the two. he hit the throttle and then it died. Got home figured out it lost spark. It did get spark again once after pulling the plugs and testing it...

My 1994 seadoo xp will start up and idle all day and run good half throttle it under but when I give it 3/4 throttle or more after a few seconds it Boggs down and sometimes I can keep it running if I give it the slightest bit of throttle while it dies but not always. It has good gas fuel lines...

Couldn’t see them with the carbs on but I had finally found a video to help me the low speed has the t shape and it’s on the side of the throttle cable and the high speed is just on the other side. Thanks for the help tho. I’m going to test it again on the lake today

I have my carbs set properly the high speed is at 0 I’ll try opening it up a 1/4 of a turn. Where is the high speed screw at and which carb? Is it the one in the front or in the back?

Great sounds good let me know how it goes

Same issue I had the carbs looked at by my jetski mechanic and he said they looked good so I still have no idea. I’ve just been working on another ski

Basically my question is could the reason the vts isn’t working be the black box in my electrical box which I believe is the mpem?

Sorry I meant to say I have a 95

I have a 65 xp from what I’ve been looking at 96 and up have the 7.5

I just bought the whole vts motor and housing the motor works and the guy claims it is good a working I even messaged him about it and he stands by his word. Before I bought the new one my old one was smoking and smelled like burnt wires. I’m not sure if it could have fried some other stuff or...

Ok motor works I just pulled the rubber cover on the wire back and connected each side to my job boat’s battery and it worked no problem both ways

How do I test it do I have to pull the connectors off to expose bare wire and just hook up one side to positive and other to negative on a battery?

I’ve thought about it being the motor I haven’t tested it but it only clickes when I hit the down button nothing when I hit up. Could it be that controller or I think it’s the mpem in the gray electrical box. That’s also what the guy was saying he thinks is bad. I’m not sure if it’s the smoke I...

It’s a new motor and vts box well they’re not new there used “new to me” and the guy claimed they were great working parts. I messaged him and he said they worked and he tested it and when I told him what happens when I click the down button the motor clicks and when I hit the up button nothing...

I have a 1995 seadoo xp. When I hit the up and down button it clicks. Now I just bought a new vts module box because before when the ski was running white smoke would come out if it and it would only click when you hit the up button. Now with the new one it clicks going up and down. I tested the...

Hey everyone my 1995 seadoo xp works with key out but when I slide it on it acts like it normally would with the key out and also sometimes you have to spam the start button to get it to turn over and start because nothing will happen when you hit it the first few times.

Hey everyone my 1995 seadoo xp works with key out but when I slide it on it acts like it normally would with the key out and also sometimes you have to spam the start button to get it to turn over and start because nothing will happen when you hit it the first few times. But the kill switch I...

Hey my 1994 seadoo xp runs good and starts up instantly but when you go full throttle it dies after 5 seconds or so of being full throttle I took it to the shop and me and the jetski mechanic (bob) looked at it and fixed a few things but that didn’t fix the problem and help?

I figured it out I took the manifold off and then the little fitting and it was FILLED with like calcium and I mean packed I had to take a small screw driver and smack it with my hand and i tested it and water was coming out so now I just need the new gaskets to come in